melt blown water filter

Part 1: Description
This product is a variety of tubular filter made of non-toxic tasteless polypropylene as the raw material, after melting, injection, traction and shaping.

Part 2: Characteristics
The filter aperture is compact and uniform, high filtration efficiency. As the particles "bridge" phenomenon occurred in the filter pores, the particles less than pore can also be blocked, the filtration efficiency is more than 98%;
High cleanliness, no pollution to water quality;
Resist acid, alkali and other chemical reagents and organic solvents;
Great strength. When the pressure difference between the inlet and outlet of the filter is 0.4Mpa, the filter element is not deformed;

Cheap, and can be reused after cleaning, reduce the using costs.

Part 3: Specification

ID & OD (mm)

Φ 30/65, Φ 28/65 etc.

Length (mm)

250, 500, 700, 1000

Filtration Accuracy (um)

1, 3, 5, 10, 15, 20, 30, 50, 70, 100

Filter Type

Without filter core, with filter core, outer sheath


Flat type, 222 type, 226 type

End Cap

Flat type, fin type

Operating Pressure


Differential Pressure


Operating Temperature


NOTE: No specified, provide filters without core.

  • Address:No.3 Sizhuangding Industrial Zone,Xinxiang City,Henan Province,China.
  • TEL: +86-13839086180  
north filter official website
Copyright©north filter    Technical support : ShangXiaCeHua  

豫公网安备 41071102000148号