string wound water filter

Part 1:
Powder resin cover filter and pre-filter is generally used in power plant condensate treatment system, the filtration element is installed inside, the film made of fiber powder and yin and yang resin powder can be applied on surface to achieve the purpose of filtration and desalination, when pressure at the filter inlet and outlet or the conductivity of the filter or the silicon reaches the set value, the filter is in a state of failure, the film goes into rupture and backwash will take place, and then it will be put into operation after film is applied.
All the parameters of wound filtration elements produced are controlled by computer, the arrange between wire and wire is homogenous and is able to ensure the overall performance of the product, combined with 304 stainless steel porous support tube, its high strength can withstand resin burst and instantaneous high-pressure impact in the backwash process, ensuring that the filter is not deformed, polypropylene fiber material does not fall off, so that the operation of condensate treatment system is guaranteed.

Part 2: Characteristics
Continuous polypropylene fiber wire wound filter, parameters arranged by computer to ensure the comprehensive performance of the product;
Full length homogenous filtration/ resin coating filtration;
All stainless steel belt threaded interface center tube and connecting parts;
Special design for backwash operation;
Full length the high dirty holding capacity;
Providing different sizes of filters element for powder resin filter/ pre filter for various applications;
The single equipment installed with the filer element has more power output, less occupation and is easy to fix up;
The system is simple, it has no acid and alkali consumption and regenerated acid and alkali waste pollution, waste is easy to handle, it is conducive to environmental protection;
Low investment costs, the pressure loss is small before and after condensate water treatment.


Part 3: Specification

Item

LY-70        Filter Element

LY-70” A      Filter Element

LY-60”        Filter Element

Media

Polypropylene fiber

Polypropylene fiber

Polypropylene fiber

Inner Core Material

304

304

304

Bottom Structure

M33×2, M33×1.5, G1”, Φ30.1 55°connecting thread

Top Structure

M6, M8, M10 thread

ID

Φ30mm

Φ30mm

Φ35mm

OD

Φ50mm

Φ50mm

Φ50mm

Filtration Accuracy

5um

5um

5um

Length

1778mm

1778mm

1524mm

Design Flow

3.1-3.2 m³/h

3.1-3.2 m³/h

2.7 m³/h

Recommended Max Pressure Difference

0.245MPa

0.245MPa

0.245MPa

Max Working Temperature

85°C

85°C

85°C

  • Address:No.3 Sizhuangding Industrial Zone,Xinxiang City,Henan Province,China.
  • TEL: +86 373 3088962   
  • Fax: +86 373 3338026
  • Email:wendy@northfilter.com
north filter official website   Made-in-China.com

Copyright©north filter    Technical support : ShangXiaCeHua  
facebook google twitter youtube linked in

豫公网安备 41071102000148号


豫ICP备12004945号-1